|
Humidity Oven Environmental Chamber Equipment
developed as a result of intensive R & D and confirming to
International Standards, suitable for most of environmental
conditions, calibration, validation & Humidity Control Oven
for above ambient conditions.
Construction
Double walled, inner S.S.304 / 316* grade & outer S. Steel or
GI dully Epoxy Powder coat / finish, gap filled with Glass wool
insulation (PUF in situ foam*) Inner full length viewing
glass / plexi door or viewing window on outer metallic door
provided. (To select while ordering) Leak proof positive
locking arrangment for door. Chamber illuminated with bulb.
Cooling
-CFC free* Refrigeration
By Hermetically sealed brand new ISI marked compressor coupled
with air cooled condensing unit fitted with Motor, fan blade,
Electrical Accessories etc.. Mounted on bottom of unit on heavy
base frame.
Humidity
Humidity Created with Steam & Injection into working chamber.
Heating
By long lasting S. Steel Tubular Heater with fins.
Temperature
Control
Electronic Digital Temperature Controller-Cum Indicator with Dry
Bulb & Wet Bulb Principle. (Direct %RH setting
optional) HTC_S
|
| Model |
Working
Size |
Cap.
Cft. Ltrs. |
| HTC
3 |
a)
40 X 40 X 57 cms |
(
3 Cft / 90 Ltrs ) |
| HTC
6 |
b)
50 X 50 X 70 cms |
(
6 Cft / 175 Ltrs ) |
| HTC
10 |
c)
57 X 57 X 88 cms |
(
10 Cft / 285 Ltrs ) |
| HTC
12 |
d)
60 X 60 X 95 cms |
(
12 Cft / 90 Ltrs ) |
| HTC
16 |
e)
70 X 70 X 90 cms |
(
16 Cft / 450 Ltrs ) |
| (
Bigger Size / Walk-in-Humidity Chamber on request. ) |
Humidity
Oven
( Above Ambient test ) |
Environment
Chamber
( * with cooling facility) |
| Temp.
Range Ambient + 50C to 600C |
100C
to 600C |
| Humidity
Range Ambient 90-95% RH |
40
to 95% RH |
Accuracy
- Temp + 10C or better
RH + 5% or better |
+
10C or better
+ 3% or better |
|
|
Optional
:
1) Strip Chart Recorder for Dry & Wet Bulb or Dry &
%RH
2) Higher Temperature Upto 700C ( RH ranges as Std )
3) Complete S. Steel Unit / GMP Models.
4) Any other sizes or other temperature range available on
request.
5) Micro controller based PID Controller with Printer
Interface (Centronic Port)
compitable with EPSON / WIPRO
6) Micro controller based PID Controller with RS-232 C PC
Interface / RS-485
Interface for multiple networking of
controller.
7) mP Profile Controller for cyclic applications (Ramps
& Soak)
|
|
Ask
Details for Programmable / Cyclic Chamber / Stability Chamber.
( * Optional )
Due to continues R & D model / specifications may change.
Picture shown with optional accessories.
|
|
